Table of Contents
Advertisement
Figure 35. Mini SAS HD to Mini SAS HD cable
v Mini SAS HD to Mini SAS (Figure 36)
Figure 36. Mini SAS HD to Mini SAS cable
Note: When inserting SAS cables, make sure that the connector is oriented
correctly.
v When connecting to the SAS ports on the left side of the node canister, the blue
v When connecting to a SAS 4-port host interface adapter, the blue pull tab must
v Insert the connector gently until it clicks into place. If you feel resistance, the
v When inserted correctly, the connector can only be removed by pulling the tab.
Procedure
To install the cables, complete the following steps.
1. Connect the required number of SAS cables. Refer to the "Planning" section of
48
Storwize V3700: Quick Installation Guide
pull tab must be below the connector.
be above the connector.
connector is probably oriented the wrong way. Do not force it.
the Knowledge Center for instructions on determining the number of cables
required.
Note: When connecting to the SAS ports on the left side of the node canister,
each host must be connected to both canisters. Both canisters must have the
same number of cables connected.
Hide quick links:
Advertisement
Table of Contents
