Table of Contents
Advertisement
2. Loosen the retaining thumbscrew 1 as shown in Figure 18.
1
Figure 18. Installing 8 Gbps Fibre Channel 4-port host interface adapter
1 Retaining thumbscrew
v
2 Filler handle
v
3 Host interface adapter
v
4 Catch slot
v
3. From inside the canister, grasp the filler handle 2 and slide the filler plate
toward the thumbscrew to disengage the plate from the catch slot 4 .
4. Remove the filler plate.
5. Insert the host interface adapter 3 into the canister as shown in Figure 18
6. Align the mounting bracket of the host interface adapter with the inside of the
host interface adapter aperture at the thumbscrew end of the canister,
ensuring that the tab at the end of the faceplate is aligned with the catch slot
4 .
7. Align the connecting edge of the host interface adapter with the slot in the
host interface adapter connector inside the canister.
2
4
3
Chapter 2. Installing the hardware
29
Hide quick links:
Advertisement
Table of Contents
