Advertisement
Resetting after Adjustment
. Set the setup menu as follows.
MENU: Maintenance
PAGE: ND Offset
ITEM: ND OFST Store → Disable
HKC-7081
2-6. Storing the Reference File
After the modification, the data stored in the reference file
become invalid.
Perform readjustment according as necessity, then store a
new reference file.
Storing the reference file
Perform the following operation with setup menu.
MENU: File
PAGE: Reference File
ITEM: Store File
(Press the MENU SEL switch to store the reference file.)
2-5. ND Offset Adjustment
2-6. Storing the Reference File
2-5 (E)
Advertisement
