Advertisement
1-3. Replacing CCD Unit
1-3-3. Disconnecting/Connecting Flexible Card Wire
The two flexible card wires are used between the MB-570 board and PA-173 board, MB-570 board and
DR-376 board. Take care not to bend forcedly these flexible card wires. This shorten the wire life.
Disconnecting
1. Turn off the power.
2. Slide portions A in the direction of the arrow to unlock and pull out the flexible card wire.
Connecting
m
. Be careful not to insert the flexible card wire obliquely.
. Check that the conductive surface of the flexible card wire is not soiled with dust.
1. Slide portions A in the direction of the arrow and insert the flexible card wire as far as it will go with
the conductive surface down.
2. Slide portions A in the reverse direction to lock.
A
A
Conductive surface
1-5 (E)
HKC-7081
Advertisement
