Advertisement
1-3. Replacing CCD Unit
1-3-2. Replacing CCD Unit
c
Never remove or install the CCD unit with the power turned on. Because touching internal harness to the
cabinet or other printed circuit boards during replacement causes shorts or electric hazards.
Prior to replacement, be sure to disconnect the optical cable or the cable connected at the DC IN connec-
tor in addition to turning off the power switch.
1. Remove the three screws, then remove the transportation holder from the HKC-7081.
P3 x 6
P3 x 6
2. Remove the right and left side panels.
3. Remove the CN-1334 board.
1-2 (E)
Transportation holder
P3 x 6
CN-1334
HKC-7081
HKC-7081
Advertisement
