Basic System - Mitsubishi Electric EB-50GU-A Instruction Book

4-2. Basic System

Click [Initial Settings] in the menu bar, and then click [Basic System] to access the Basic System settings screen.
Make necessary basic system settings such as EB-50 unit settings, network settings, and M-NET settings, and
then click [Save Settings] to send the settings to the EB-50. A message will appear asking whether or not to
restart the EB-50. Click [OK] to restart the EB-50 to reflect the changes.
Note: The Basic System settings may not be accessible if logged in as a building manager.
Unit Settings
Set the EB-50 name
and unit ID.
Network Settings
Set the EB-50 IP address
and subnet mask.
Display Format
Set the screen display items
for the EB-50 and the Web
browser.
Refresh
Click to import the settings
from EB-50.
4-2-1. Unit Settings
Follow the instructions below to set the EB-50 unit name and unit ID in the [Unit Settings] section. The EB-50
serial number and software version will appear.
(1) Enter the unit name in the [Name] field in 40 alphanumeric or symbol characters or less. The name entered
here will be used on the screen of the software that controls multiple EB-50 units and will also be used as a
sender name in the error notification e-mail and e-mail alarm.
Note: The following characters cannot be used in the [Name] field: <, >, &, ", or '
(2) Enter the unit ID in the [Unit ID] field in 6 figures. Use this setting to manage the multiple unit IDs. The unit
ID entered here will be used on the screen of the software that controls multiple EB-50 units and will also
be used as a sender ID in the error notification e-mail and e-mail alarm.
12
M-NET Settings
Set the EB-50 M-NET
address and range of
prohibited controllers.
External Input Setting
Set the EB-50 external
signal input mode.
Advanced Setting
Click to display the screen
for making advanced
settings.
Save Settings
Click to send the settings to
EB-50.