Initial Settings; Date And Time - Mitsubishi Electric EB-50GU-A Instruction Book

4. Initial Settings

This chapter explains how to set the initial settings on the Web Browser for Initial Settings.

4-1. Date and Time

Click [Initial Settings] in the menu bar, and then click [Date and Time] to access the date and time settings
screen.
Set the current date and time, and then click [Save Settings] to send the settings to the EB-50.
Note: The date and time settings may not be accessible if logged in as a building manager.
Note: The date and time settings made on this screen will be reflected on all the units in the M-NET system.
Note: The date and time cannot be set on this screen if the [Time Master] setting is set to [Sub].
Daylight saving time
setting
Click to enable the daylight
saving time setting.
Refresh
Click to acquire the current
date and time from the
EB-50.
(1) Enter the current date and time.
(2) To adjust the daylight saving time automatically, check the [Automatically adjust clock for daylight saving
changes] checkbox, and select the applicable country in the pulldown menu.
If the applicable country is not in the pulldown menu, select [Custom Settings] instead. A [Custom Settings]
button will appear on the right of the pulldown menu.
Click the [Custom Settings] button to open the Custom Settings screen, and configure the daylight saving
time setting.
Custom Settings screen
11
Current date and time
Enter the current date and
time.
Save Settings
Click to save the changes
made.