Garmin EDGE 520 PLUS Owner's Manual page 48

4
Replace the screws, and use the 2 mm hex
key to tighten the screws.
5
Insert the Edge device into the top of the
mount.
The lever adapter must be in the open
position. The red mark indicates the open
position.
6
Snap the lever to the closed position to lock
the Edge device into the mount.
NOTE: For more information about
mounting the accessory, see the accessory
instructions.
Limited Warranty
The Garmin standard limited warranty applies
to this accessory. For more information, go to
www.garmin.com/support'warranty.html.
4 Instructions