D-Link DWL-7100AP Manual page 22

Using the Configuration Menu (continued)
Advanced > Grouping
Load Balance: Select Enabled or Disabled.
When you Enable
network traffic and wireless clients among the DWL-7100APs in the network.
Assign each access point a different non-overlapping channel (e.g., 1, 6, 11).
User Limit: Set the User Limit in this field (0-64).
Link Integrity: Select Enabled or Disabled.
When Link Integrity is Enabled, whenever the Ethernet connection between
the LAN and the AP is disconnected - then the wireless segment associated
with the AP will also be disconnected from the AP.
Ethernet Link Status:
there is an Ethernet LAN connection to the AP.
Apply: Click Apply if you have made any changes.
Load Balance
you allow several DWL-7100APs to balance wireless
This field displays the Ethernet Link Status. Link Up indicates that
22