Using the Configuration Menu (continued)
Home > Wireless
Note: In the Configuration screens that follow, you will be able
to configure settings for 802.11a and 802.11g devices in your
network. Settings that you input for 802.11g devices will also apply
to 802.11b devices in your network.
Wireless
Band-
Service Set Identifier (SSID) is the name designated for a specific
SSID-
wireless local area network (WLAN). The SSID's factory default setting
is default. The SSID can be easily changed to connect to an existing
wireless network or to establish a new wireless network.
SSID Broadcast-
Enable or Disable SSID Broadcast. Enabling this feature broadcasts
the SSID across the network.
52 is the default channel for 802.11a, and 6 is the default channel for
Channel-
802.11g. All devices on the network must share the same channel.
Radio Frequency-
The radio frequency will reflect the channel selection.
Apply-
Click Apply to save the changes.
Select 802.11g or 802.11a from the pulldown menu.
12