D-Link DWL-7100AP Manual page 14

Using the Configuration Menu (continued)
Choose 802.11a or 802.11g
wireless band; then select
from the following options:
Access Point:
Select this
mode to create a WLAN
( w i r e l e s s l o c a l a r e a
network).
PtP Bridge (Point to Point
Bridge):
This mode enables
y o u t o c o n n e c t t w o
WLANS.
Remote AP MAC Address:
Input the remote AP MAC
address of the AP with
which the DWL-7100AP will
associate.
PtMP Bridge (Point to Multi-
Point Bridge):
This mode
enables you to connect
multiple WLANs
Remote AP MAC Address:
Input the remote AP MAC
Addresses of the APs with which the DWL-7100AP will associate
FOR INFORMATION REGARDING CONFIGURATION OF THE AP REPEATER AND
AP CLIENT MODE, PLEASE SEE THE FOLLOWING PAGE OF THIS MANUAL.
Advanced > Mode
14