D-Link DWL-7100AP Manual page 19

Using the Configuration Menu (continued)
Advanced > Filters > WLAN Partition
Wireless Band
-
Internal Station
Connection-
Ethernet to WLAN
Access-
Internal Station
Connection
Between 802.11a
and 802.11g-
Select IEEE802.11a or IEEE802.11g.
Enabling this feature allows wireless clients to communicate
with each other. If this feature is disabled, wireless stations of
the selected band are not allowed to exchange data through
the access point.
Enabling this feature allows Ethernet devices to communicate
with wireless clients. If this feature is disabled, all data from the
Ethernet to associated wireless devices is blocked, but wireless
devices can still send data to the Ethernet.
Select Connection Enabled to enable communication between the
802.11a and the 802.11g bands.
19