D-Link DVG-1120M Manual page 9

Web-based Management (continued)
Setting Up the Connection
To configure the WAN port, please do the following:
Click on Configure WAN Port.
Then go to Start>Control
Panel>Network
Connections>Right-click local
area connection >select
Properties> double click Internet
Protocol (TCP/IP). The screen at
right will appear.
The VoIP gateway's WAN port comes
with DHCP as default IP setting. If the
VoIP gateway cannot get the
assigned DHCP IP, it will use the
manual IP (default is 10.1.10.5 ) as
it's default IP.
Make sure the PC is in the same IP
domain as the VoIP gateway. You
can do this by changing the IP
address of the PC as shown here.
Manually input the
WAN IP Address here.
9