D-Link DVG-1120M Manual page 16

Web-based Management (continued)
Configure LAN Port > NAT Configuration > Dynamic NAT
This window allows you
to view the current
Dynamic NAT settings.
Click the edit icon on
this window to access
the second Dynamic
NAT window:
The items on this
window are described
below:
Index - Choose the
index number that you
would like to edit (Form
1 to 6).
Global IP Start - Enter
the beginning designated
IP address for the
particular range of
packets you wish to
redirect to
addresses.
Global IP End - Enter the end designated IP address for the particular range of
packets you wish to redirect to local addresses.
Local IP Start - Enter the beginning designated IP address for the particular
range of packets you wish to redirect to Global addresses.
Local IP End - Enter the end designated IP address for the particular range of
packets you wish to redirect to Global addresses.
State - This toggles Disable and Enable for the Dynamic NAT function.
Click Save to save the settings.
local
16