D-Link DVG-1120M Manual page 12

Web-based Management (continued)
Configure LAN Port > DHCP Configuration > Dynamic IP Assignment
Use the Dynamic IP
Assignment
configure the device to
act as a DHCP server
for the LAN.
The items on this
window are described
below:
Default Gateway - This specifies the Gateway IP Address that will be assigned
to and used by the DHCP clients.
Start IP Address -This is the base (starting) address for the IP pool of
unassigned IP addresses.
IP Range - This is the range of contiguous, IP addresses above the base IP
Address above.
Netmask - This mask informs the client, how the destination IP address is to
be divided into network, subnet, and host parts. The netmask has ones in the
bit positions in the 32-bit address which are to be used for the network and
subnet parts, and zeros for the host part.
Leased Time - This specifies the amount of time (in seconds) a client can
lease an IP address, from the dynamically allocated IP pool.
DNS Server IP - This specifies the Domain Name System server, used by the
DHCP clients using leased IP addresses, to translate hostnames into IP
addresses or vice-versa.
WIN Server IP - Some LANs may require using WINS servers; enter the IP
address of the WINS server or leave blank.
Domain Name - Enter a domain name for the network group or leave blank.
State - This toggles Disable and Enable for the DHCP function.
Click Save to save the settings.
to
12