Replacing The Speakers; Procedure; Post-Requisites - Dell Inspiron 27 7000 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the speakers on the display-assembly base and align the screw holes on the speakers with the screw holes on the display-
assembly base.
2 Replace the nine screws (M3x4+7.1) that secure the speakers to the display-assembly base.
3 Route the speaker cable through the routing guides on the display-assembly base.
4 Connect the speaker cable to the system board.

Post-requisites

1 Replace the rear-I/O bracket.
2 Replace the base cover.
3 Replace the back cover.
4 Replace the system-board
5 Replace the stand.
computer. After working inside your computer, follow the instructions in
shield.

Replacing the speakers

www.dell.com/
35
After working inside
Replacing the speakers 59