NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment posts on the display-assembly base, place the speakers on the display-assembly base.
2. Replace the four screws (M3 4+7.1) that secure the speakers to the display-assembly base.
3. Route the speaker cable through the routing guides on the display-assembly base.
4. Connect the speaker cable to the system board.
Post-requisites
1. Replace the
system-board
2. Replace the
back
cover.
3. Replace the stand.
58
Replacing the speakers
computer. After working inside your computer, follow the instructions in
shield.
Replacing the speakers
36
After