Removing The Display Panel; Prerequisites; Procedure - Dell Inspiron 27 7000 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board
4 Remove the hard drive.
5 Remove the wireless card.
6 Remove the heat sink.
7 Remove the camera.
8 Remove the base cover.
9 Remove the rear-I/O bracket.
10 Remove the speakers.
11 Remove the system board.

Procedure

1 Remove the display-backlight cable from the routing guides on the display-assembly base.
2 Remove the 12 screws (M3x5) that secure the middle frame and display-assembly base to the display panel.
NOTE: The screws that secure the middle frame and display-assembly base to the display panel are silver in color and
etched with "LCD" around the screw holes.
82

Removing the display panel

computer. After working inside your computer, follow the instructions in
shield.
Removing the display panel
50
After working inside
www.dell.com/