Dialling Mode; Ring Priority - BT Aqua Cordless Telephone User Manual

Dialling mode

1. Press , scroll
Menu
2. Scroll to
Set Base
3. Scroll to
Dialling Mode
4. Press or to highlight
to confirm.
5. Press to return to the previous menu level or close the
Back
handset cover to return to standby.

Ring priority

1. Press , scroll
Menu
2. Scrol l to
Set Base
3. Scroll to
Ring Priority
4. Press or to highlight
then press .
Select
If you choose
Select Handset
displayed. Scroll
then press .
Select
Scroll or to the number of rings you want to set 2, 4 or
6 and press .
Select
5. Press to return to the previous menu level or close the
Back
handset cover to return to standby.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
BT Aqua – Edition 3 - 24.04.07 – 8131
to and press
Settings
and press .
Select
and press
Select
or
Pulse Tone
to and press
Settings
and press .
Select
and press
Select
or
All Handsets
all available handsets are
or to highlight the handset you want
.
Select
.
then press
Select
.
Select
.
Select Handset
Base settings
Your BT Aqua is pre-set to Tone
dialling. You should not normally need
to change this setting. The dial mode
options are Tone (Time Break/Earth) or
Pulse (Earth).
When you have more than one
handset registered to your base, you
can set one handset to ring before the
other handsets. This allows one
handset user to answer all incoming
first, like a receptionist.
Choose All Handsets if you want all
handsets to ring at the same time or
Select Handset to nominate a
handset to ring two times before the
others.
33