Table of Contents
Advertisement
5672 BT Synergy 3105 UG [4]
Dialling mode
1. Press
then scroll
2. Scroll
to
DIAL MODE
3. Press
or
Automatically insert a pause after access code
With some switchboards, you may be required to dial a pause after entering the
switchboard access code (e.g. 9) to enable you to get an outside line.
This feature automatically inserts a pause between the access code and the telephone
number you have entered in the phonebook. However, for this feature to work, you must
still enter the access code before the telephone number when storing the number in the
Phonebook.
1. Press
then scroll
2. Scroll
to display
3. Scroll
to
PBX 1
4. Enter the PIN (original code 0000) and press
5. Enter the switchboard access code (e.g. 9) and press
11/11/03
BT Synergy 3105 – Edition 4 – 11.11.03 – 5672
to
and press
SETUP
and press
.
to select either
TONE
or
PULSE
to display
SETUP
PABX
and press
and press
to display
3:59 PM
Page 47
.
and press
to confirm.
and press
.
.
PIN?
.
.
General information
47
Advertisement
Table of Contents
