On-Screen Alert; Record Your Own Outgoing Message - BT Aqua Cordless Telephone User Manual

52 Answering machine
Answer delay sets the number of times
your BT Aqua will ring before the
answer machine picks up your call and
starts playing the outgoing message.
You can change this setting to
between 2–9 rings or Time Saver.
The default setting is 6 rings.
For information on Time Saver, see
Switch your answering machine on
remotely, page 58.
Answer and Record
The pre-set Answer and Record
outgoing message, that allows your
caller to leave a message, is "Hello,
your call cannot be taken at the
moment, so please leave your message
after the tone".
Your Answer and Record outgoing
message can be up to 3 minutes long
and will replace the prerecorded
message.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
BT Aqua – Edition 3 - 24.04.07 – 8131
4. Scroll or to highlight
5. Press to return to standby.
Back

On-screen alert

When you have new answering machine messages, the screen
shows
You have X new messages
indicated by a blue dot.
1. Press . Or, scroll
Play
to hear the highlighted message.
Outgoing messages
The outgoing message is the message a caller first hears when
the answering machine picks up their call. There are 2 pre-
recorded outgoing messages to choose from (see note right)
or you can record your own.

Record your own outgoing message

1. Press , scroll
Menu
.
Select
2. Scroll to
Outgoing Message
3. is highlighted, press
Record
or and press
On Off
. All new messages are
or the list of messages. Press
to
Answering Machine
and press
Select
.
Select
.
Select
Play
and press
.