Check Or Delete Your Outgoing Message - BT Aqua Cordless Telephone User Manual

4. Scroll or to
Answer & Record
press .
Select
5. The display shows
Please speak after the tone
6. After the tone, speak your message clearly into the handset
then press to end recording.
Save
7. Your outgoing message is played back. If you want to delete it,
press during playback. If you press
Delete
the message to play back, it will be saved.

Check or delete your outgoing message

1. Press , scroll
Menu
press .
Select
2. Scroll to
Outgoing Message
3. Scroll to and press
Play
4. Scroll or to
Answer & Record
press .
Select
5. Press to
Personal OGM
6. The message is played. Press
to delete a personal OGM.
Delete
7. Press to return to the previous menu level.
Back
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
BT Aqua – Edition 3 - 24.04.07 – 8131
or
Answer Only
Save
to
Answering Machine
and press
Select
.
Select
or
Answer Only
and press
Select
to stop playback or press
OK
and
Answer Only
The pre-set Answer Only outgoing
message, where callers hear an
announcement but cannot leave a
.
message, is "Hello, your call cannot be
taken at the moment and you cannot
leave a message, so please call later".
When recording your Answer Only
message, remember to advise your
caller that they will not be able to
or wait for
leave a message.
Your Answer Only message can be up
to 11 minutes long (maximum
recording length) and will replace the
pre-recorded message.
However, you should try to keep your
and
message short to allow time for
recording memos, or incoming
messages when using Answer and
.
Record mode.
Deleting a personal outgoing message
automatically reinstates the pre-
and
recorded outgoing message.
.
You cannot delete a pre-recorded
message.
Answering machine 53