System Settings - D-Link DIR-450 User Manual

Section  - Configuration
Save Settings to
Use this option to save the current router
Local Hard Drive: configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Load Settings Use this option to load previously saved router
from Local Hard configuration settings. First, click Browse to find
Drive: a previously save file of configuration settings.
Then, click the Upload Settings button to
transfer those settings to the router.
Restore to Factory This option will restore all configuration settings
Default Settings: back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Reboot: Click to reboot the router.
D-Link DIR-450 User Manual

System Settings