D-Link DIR-450 User Manual page 11

Section  - Installation
4. Connect the power adapter to the receptor on the back panel of your DIR-450 Mobile Router. Then plug the other
end of the power adapter into a wall outlet or power strip.
a. The Power LED will turn ON to indicate power has been applied.
b. Other LEDs will flash ON and OFF as the DIR-450 Mobile Router performs initialization and Internet connection
processes. This will take a few minutes.
c. When complete, the following LEDs will illuminate blue: Power, Status, Internet, WLAN, and LAN Port 1 (or your
specific LAN Port connection).
D-Link DIR-450 User Manual 11