Network Settings - D-Link DIR-450 User Manual

Section  - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router IP Address:
Enter the IP address of the router. The default
IP address is 192.168.0.1.
If you change the IP address, once you click
Apply, you will need to enter the new IP
address in your browser to get back into the
configuration utility.
Default Subnet Mask:
Enter the Subnet Mask. The default subnet
mask is 255.255.255.0.
Local Domain Name:
Enter the Domain name (Optional).
Enable DNS Relay:
Check the box to transfer the DNS server
information from your ISP to your computers. If
unchecked, your computers will use the router
for a DNS server.
Refer to the next page for DHCP information.
D-Link DIR-450 User Manual

Network Settings

0