Wireless Settings - D-Link DIR-450 User Manual

Section  - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless
Name:
network. Create a name using up to 32 characters. The
SSID is case-sensitive.
Wireless Channel:
Indicates the channel setting for the DIR-450. By
default the channel is set to 6. The Channel can be
changed to fit the channel setting for an existing wireless
network or to customize the wireless network. The Auto
Channel Scan setting can be selected to allow the
DIR-450 to choose the channel with the least amount
of interference.
Note: Super G with Dynamic Turbo mode only operates
in Channel 6.
Super G Mode:
Super G is a group of performance enhancement features that increase end user application throughput in an 802.11g
network. Super G is backwards compatible to standard 802.11g devices. For top performance, all wireless devices on the
network should be Super G capable. Select either Disabled, Super G without Turbo, or Super G with Dynamic Turbo.
• Disabled - Standard 802.11g support, no enhanced capabilities.
• Super G without Turbo - Capable of Packet Bursting, FastFrames, Compression, but no Turbo mode.
• Super G with Dynamic Turbo - Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This
setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all
devices on the wireless network are Super G with Dynamic Turbo enabled.
D-Link DIR-450 User Manual

Wireless Settings

1