Konica Minolta bizhub 4750 Service Manual page 17

Security Function Ver. 1.01 Sep. 2014
6. Touch the input area of [Password] and enter an 8-digit CE password to be newly used
from the keyboard on the screen.
7. Touch the input area of [Password Confirmation] and enter the 8-digit CE password to
be newly used from the keyboard on the screen.
NOTE
• The machine does not accept any new password that contains only the same char-
acter, consists of less than 8 digits, or that is the same as the previous password.
• In the CE password change display, enter the same CE password to the entry
areas (upper and lower).
• For the CE Password, set a value other than the default.
• NEVER forget the CE password. When forgetting the CE password, call responsi-
ble person of KM.
If the CE password is forgotten, replacement of the MFP board will initialize the
setting values and turn "OFF" the Enhanced Security mode. Be sure to have the
administrator set the Enhanced Security mode back to "ON" again.
NOTE
• If there is a mismatch in the CE Password between that typed first and that just
typed, the machine displays a message telling that the CE Password entered is
wrong. In this case, set the CE Password once again.
Characters and symbols to be used for the CE password
• Numeric characters: 0 to 9
• Alpha characters: upper and lower case letters
• Symbols: !, #, $, %, &, ', (, ), *, ,, -, ., /, :, ;, <, =, >, ?, @, [,\ , ], ^, _, `, {, |, }, ~, +,
SPACE
Selectable from among a total of 94 characters
* The symbol """ cannot be selected.
8. Service Mode functions
A6F7S1E007DA
13