2. Install the following components:
a)
Heat sink
b)
System board shield
c)
Back cover
d)
Stand
3. Follow the procedure in
NOTE:
If the processor is replaced, use the thermal grease provided in the kit to ensure that thermal conductivity is
achieved.
Base cover
Removing the base cover
1. Follow the procedure in
2. Remove the following components:
a)
Stand
b)
Cable cover (optional)
c)
Back cover
d)
System board shield
3. Remove the four screws (M3x5) that secure the base cover to the display assembly base.
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
53