Dell OptiPlex 5270 All-in-One Service Manual page 46

5. To remove the pop-up camera bezel:
a) Press the top of the pop-up camera assembly to extend the pop-up camera.
b) Remove the three screws (M3x5) that secure the bezel to the pop-up camera assembly [2].
c) Lift the pop-up camera bezel off the pop-up camera assembly [3].
6. To remove the pop-up camera module:
a) Release the camera module from the tab [1].
b) Remove the camera module along with the camera cable off the pop-up camera assembly [2].
46 Removing and Installing components