Disassembly And Reassembly; Base Cover - Dell Inspiron 5591 2n1 Service Manual

Component
Power button
USB Type-C bracket
System board
Touchpad bracket
Touchpad
Display assembly

Disassembly and reassembly

Base cover

Removing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Remove the six screws (M2x7) that secure the base cover to the palm-rest and keyboard assembly.
2. Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly.
3. Using your fingertips, pry the base cover off the palm-rest and keyboard assembly from the top left corner.
4. Lift the base cover off the palm-rest and keyboard assembly.
Secured to
Palm-rest and keyboard
assembly
System board
Palm-rest and keyboard
assembly
Palm-rest and keyboard
assembly
Palm-rest and keyboard
assembly
Palm-rest and keyboard
assembly
computer. After working inside your computer, follow the instructions in
Screw type
M2x2.5
M2x3
M2x2 Big Head
M2x3
M2x2 Big Head
M2.5x5
Quantity Screw image
2
2
5
3
4
6
Removing and installing components
After
9