Back Cover; Removing The Back Cover; Installing The Back Cover - Dell OptiPlex 5270 All-in-One Service Manual

2. Follow the procedure in

Back cover

Removing the back cover

1. Follow the procedure in
2. Remove the Stand.
3. Press and hold the tab on the back cover to release it from the latch on the system-board shield and slide the back cover in the
direction shown to release it from the middle frame [1].
4. Lift the back cover from the middle frame and the system-board shield [2].

Installing the back cover

1. Place the back cover on the system.
2. Press and hold the tab [1], and align the notches on the back cover with the slots on the middle frame.
3. Slide the back cover in the direction shown to lock the back cover tab under the latch on the system-board shield [2].
22 Removing and Installing components
After working inside your computer
Before working inside your computer.