Installing The Cable Cover; Side Cover; Removing The Back Cover - Dell OptiPlex 7450 All-In-One Owner's Manual

Installing the cable cover

1. Align the notches on the cable cover to the holes on the computer and press the cable cover until it snaps in.
2. Tighten the screw to secure the cable cover to the computer.
3. Install the stand.
4. Follow the procedure in

Side Cover

Removing the back cover

1. Follow the procedure in
2. Remove the:
a. stand
b. cable cover
3. Pry the edges of the back cover from the bottom to release it from the computer.
18 Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.