Configuring The Bluetooth® Settings; Setting The Use Of Bluetooth; Terminating The Connection Between A Bluetooth® Device And The Unit; Setting The Use Of The Bluetooth® Standby Function - Yamaha RX-V485 Owner's Manual

Configuring the Bluetooth® settings
Setting the use of Bluetooth®
Enables/disables the Bluetooth function.
Setup menu
"Bluetooth" > "Bluetooth"
Settings
Off Disables the Bluetooth function.
On Enables the Bluetooth function.
Terminating the connection between a Bluetooth®
device and the unit
Terminates the Bluetooth connection between a Bluetooth device (such as a
smartphone) and the unit.
Setup menu
"Bluetooth" > "Audio Receive" > "Disconnect"
Select "Disconnect" and press ENTER to terminate the Bluetooth connection.
Note
This setting is not available when no Bluetooth devices are connected.
Setting the use of the Bluetooth® Standby function
Selects whether to enable/disable the function that turns on the unit from Bluetooth
devices (Bluetooth standby). If this function is set to "On", the unit automatically turns
on when a connect operation is performed on the Bluetooth device.
Setup menu
"Bluetooth" > "Audio Receive" > "Bluetooth Standby"
Settings
Off Disables the Bluetooth standby function.
Enables the Bluetooth standby function.
On
(The unit consumes more power than when "Off" is selected.)
Note
This setting is not available when "Network Standby" is set to "Off". For details, see the following:
▪ "Setting the use of the Network Standby function" (p.111)
113
En