Leds - D-Link DSS-24 User Manual

DSS-24 10/100 Auto Negotiation Switch User's Guide
The LED panel of the DSS-24, displayed in Figure 9, is designed to give you
critical information at a glance.
The LEDs indicate the following:
All LEDs are described in detail. See Table 2: Per Port LEDs, to determine the
meaning of each LED.
Power
The power LED lights when the DSS-24 is powered on. The purpose is to confirm
that the DSS-24 is getting adequate power. The power LED is green when the
DSS-24 is powered on and dark when it is powered off.
Link/ Act/ Collision
Solid green indicates the port is linked up. Dark (off) indicates there is no link at
the port.
Flashing green indicates there is activity (transmitting or receiving) at the port.
Flashing yellow indicates collisions are occurring at the port.
100Mbps/ 10Mbps
The 100Mbps/10Mbps LED indicates the speed of the port. The LED is lit when
the port is working at 100Mbps and dark when the port is working at 10Mbps.

LEDs

Power
Link
Activity
Collision
Speed
4
LEDs
16