Package Contents; Front Panel Description; Front Panel Leds - D-Link DGS-1520-28MP Quick Installation Manual

Information in this document is subject to change without notice.
© 2021 D-Link Corporation. All rights reserved.

Package Contents

Open the shipping carton of the switch and carefully unpack its contents. The model you
have purchased may appear slightly different from the one shown in the illustrations. The
carton should contain the following items:
One DGS-1520-28MP switch

One AC power cord

One power cord retainer

One console cable (RJ-45 to RS-232)

One rack mounting kit (two brackets and screws)

Four rubber feet with adhesive backing

One Quick Installation Guide


Front Panel Description

The front panel of the switch contains the following items:
20 10/100/1000Base-T PoE ports

4 100/1000/2.5GBase-T PoE ports

2 10GBase-T ports

2 10GBase-X SFP+ ports

RJ-45 console port

LEDs: Power, RPS, Console, Fan Error, Link/Activity/Speed Mode, PoE Mode, Link/

Activity/Speed (per port), PoE OK/PoE Fail (per PoE port), Stack ID
Mode, Reset/ZTP buttons


Front Panel LEDs

The front panel of the switch contains the following LEDs: Power, RPS, Console, Fan
Error, Link/Activity/Speed Mode, PoE Mode, Link/Activity/Speed (per port), PoE OK/PoE
Fail (per PoE port), Stack ID.
Figure 1 — DGS-1520-28MP front panel
2