DSS-24 10/100 Auto Negotiation Switch User's Guide
Installation Options
There are two options for installing the DSS-24: desktop/shelf installation or rack
installation. The procedures for each are explained in the following sections.
The following tools and materials may be necessary to install the DSS-24:
Desktop/Shelf Installation
The dimensions of the DSS-24 are: 441 mm (17.44 inches) x 235 mm (9.25
inches) 63 mm (2.44 inches). The measurements include the 8 mm (.31 inch)
rubber feet.
Follow these guidelines for desktop/shelf installation or rack installation:
Follow these steps to install the DSS-24 on a desktop or shelf:
1.
2.
Installing the DSS-16 and DSS-24
Screwdriver to install the brackets as needed.
Wire cutters to cut cable as needed for network connections.
Crimpers to crimp cable as needed.
RJ-45 connectors as needed.
The surface must support 3 kg (6.6 lbs).
The power source must be within 1.82 m (6 feet).
Power cord and cables should never be stretched.
Leave at least 5 cm (two inches) around the DSS-24 for
ventilation.
Place the four rubber feet at the corners of the DSS-24, see Figure
4.
Place the DSS-24 on the desktop/shelf, see Figure 5.
7