Rack Installation - D-Link DSS-24 User Manual

DSS-24 10/100 Auto Negotiation Switch User's Guide

Rack Installation

The DSS-24 can be mounted in an EIA standard size 19 inch rack. The
dimensions are: 441 mm (17.44 inches) x 235 mm (10.03 inches) x 55 mm (2.16
inches), 1.25 U. DSS-24 can be placed in a wiring closet along with other
equipment.
Follow these steps to install the DSS-24 on a rack:
1.
2.
3.
Figure 6: Attach Mounting Brackets
Installing the DSS-16 and DSS-24
Attach a mounting bracket to each side of the DSS-24 with the
screws provided, see Figure 6.
Slide the DSS-24 into the rack and use the screws provided to
secure the DSS-24 to the rack, see Figure 7.
Connect the power cord and verify that the DSS-24 is receiving
adequate power.
9