Electrical Safety - EdgeStar AP12000S-1 Service Manual

Electrical Safety

 Do not exceed the power outlet ratings.
 It is recommended that the unit be connected to its own circuit.
 A standard electrical supply that is properly grounded in accordance with the National Electrical Code
and all state and local codes and ordinances is required.
 Do not use outlets that can be turned off by a switch or pull chain.
 Always turn the unit off and unplug it from the outlet when cleaning.
 Unplug the unit if it is not going to be used for an extended period of time.
 Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose socket.
 Be sure the appliance is properly grounded.
 Do not bypass, cut, or remove the grounding plug.
 If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.
 Do not use extension cords or power strips with this unit. You may need to contact an electrician if it is
necessary to use a longer cord or if you do not have a properly grounded outlet. Do not modify the
power cord's length or share the outlet with other appliances.
 Do not start or stop the unit by switching the electrical circuit's power on and off.
 Immediately unplug the unit if it makes strange sounds, emits an odor or smoke and contact customer
service.
 Do not remove any part of the casing unless instructed by an authorized technician.
 Before the appliance is removed from service or discarded, remove any doors and cut off the power
cord.
3