Switch Port Commands - D-Link DES-3250TG Reference Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
The switch port commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config ports <portlist/all>
speed
[auto/10_half/10_full/100_half/100_full/
1000_half/1000_full]
learning [enabled/disabled]
state [enabled/disabled]
show ports <portlist/all>
Each command is listed, in detail, in the following sections.
config ports
Purpose Used to configure the switch's Ethernet port
settings.
S P
WITCH
C
OMMANDS
49
5
ORT