Configuring The Switch; User Accounts Management - D-Link DES-3250TG User Manual

To begin managing your Switch simply run the browser you have installed on your computer and point
it to the IP address you have defined for the device. The URL in the address bar should read something
like: http://123.123.123.123, where the numbers 123 represent the IP address of the switch.
Note: The Factory default IP address for the switch is 10.90.90.90.
In the page that opens, click on the Login to make a setup button:
This opens the management module's main page.
The switch management features available in the Web-based manager are explained below.

Configuring the Switch

User Accounts Management

From the Management menu, click User Accounts and then the User Account Management window
appears.
Click Add to add a user.
1. Enter the new user name, assign an initial password, and then confirm the new password.
Determine whether the new user should have Admin or User privileges.
2. Click Apply to make the user addition effective.
3. A listing of all user accounts and access levels is shown in the User Account Management
window. This list is updated when Apply is executed. Click Show All User Account Entries to
access this window.
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 1. Login button
Figure 6- 2. User Account Management window
Figure 6- 3. User Account Modify Table window
36