Traffic Classification And Prioritization; Management - D-Link DES-3250TG User Manual

Standalone layer 2 switch
Hide thumbs Also See for DES-3250TG:
Table of Contents

Advertisement

IEEE 802.3ab compliant for 1000BASE-T (Copper) Gigabit ports (optional module).
Data forwarding rate 14,880 pps per port at 100% of wire-speed for 10Mbps speed.
Data forwarding rate 148,800 pps per port at 100% of wire-speed for 100Mbps speed.
Data filtering rate eliminates all error packets, runts, etc. at 14,880 pps per port at 100% of wire-
speed for 10Mbps speed.
Data filtering rate eliminates all error packets, runts, etc. at 148,800 pps per port at 100% of
wire-speed for 100Mbps speed.
8K active MAC address entry table per device with automatic learning and aging (10 to 1,000,000
seconds).
64 MB packet buffer per device.
Supports Port Mirroring.
Supports Port Trunking.
802.1D Spanning Tree support.
802.1Q Tagged VLAN support – up to 255 VLANs per device (one VLAN is reserved for internal
use).
GVRP – (GARP VLAN Registration Protocol) support for dynamic VLAN registration.
802.1p Priority support with 4 priority queues.
IGMP Snooping support.

Traffic Classification and Prioritization

Based on 802.1p priority bits.
Four priority queues.

Management

RS-232 console port for out-of-band network management via a console terminal or PC.
Fast Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of
network loops.
SNMP V1, V2C, and V3 are supported.
Fully configurable in-band control for SNMP based software.
Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the
console.
Built-in SNMP management:
SNMP V2-MIB (RFC 1907).
Bridge MIB (RFC 1493).
D-Link DES-3250TG Standalone Layer 2 Switch
2

Advertisement

Table of Contents
loading

Table of Contents