System Log Servers - D-Link DES-3250TG User Manual

Configure the following Access Rule Configuration settings (additional parameters are described in
earlier sections):
Parameter

System Log Servers

Click Add to add an entry to the table in the window above.
D-Link DES-3250TG Standalone Layer 2 Switch
Description
Profile ID This is the identifier number for this profile
set.
Access ID Type in a unique identifier number for this
access. This value can be set from 1 to 255.
Priority
Select this option to instruct the switch to
use the 802.1p priority value entered in the
adjacent field for packets that meet the
criteria. A number between 0 − lowest
priority, and 7 − highest priority, can be
entered.
replace Select this option to instruct the switch to
priority
replace the 802.1p value (in a packet that
meets the selected criteria). In this way,
packets meeting the criteria can have their
priority handling modified for use within the
switch, and then have a different priority
value assigned when they leave the switch.
Replace Dscp Select this option to instruct the switch to
replace the DSCP value (in a packet that
meets the selected criteria) with the value
entered in the adjacent field.
Figure 6- 45. System Log Servers window
83