Viewing Data Statistics; Viewing Encryption Status - Motorola MTP830 User Manual

Note: To transfer data from a standard computer over the air, connect the computer via the data cable
PMKN4025 with your radio. Your service provider has to setup additional applications on your computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot Packet Data
(MSPD) Service.
Note: This is a selling feature.

Viewing Data Statistics

Procedure:
1 From the home screen, press the
2 Select More . . . → Packet Data.
Note: Data services are only available in TMO Mode. The data option must be set to Voice & Data or
Data Only.
3 Select one of the following:
• Sent Data — the number of KBs sent and throughput since current Packet Data activation is displayed.
• Received Data — the number of KBs received and throughput since current Packet Data activation is
displayed.
• Bandwidth — active data session percentage is shown.
• Failed Transfer — the percentage of failed sent/received packets.
Note: N.A. — standby packet data session.

Viewing Encryption Status

Procedure:
1 From the home screen, press the
2 Select More . . . → Packet Data → Encryption.
3 The encryption state of the ongoing packet data session is displayed:
• Packet Data Channel Clear
• Packet Data Channel Encrypted
• EncryptionN/A (clear)
key.
MENU
key.
MENU
Main Menu | 93
| | Send Feedback