D-Link DES-1316 Manual page 32

Web-smart 8-port 10/100mbps ethernet switch with 8 10/100mbps 802.3af power over ethernet ports

Hide thumbs Also See for DES-1316:

Table of Contents

To change the port setting, click on the ID parameter to enter the

selected port to configure its Speed/Disable and Flow control.

Figure 17.

Speed/Disable:

This setting has six modes—100M Full, 100M Half, 10M Full, 10M

Half, Auto, and Disable—for speed or port disable selections.

Flow Control:

This setting determines whether or not the Switch will be handling

flow control. Set FlowCtrl to Enable for avoiding data transfer

overflow. If it is set to Disable, there is either no flow control or other

hardware/software management.

Table of Contents