D-Link DIR-806A User Manual page 152

DIR-806A Wireless AC750 Dual Band Router
User Manual
Parameter
End IPv4 address /
End IPv6 address
Subnet IPv4 address /
Subnet IPv6 address
Destination port
Set source port
manually
Source port
Click the APPLY button.
To edit a rule for IP filtering, select the relevant line in the table. On the opened page, change the
needed parameters and click the APPLY button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the Delete button. Also you can remove a rule on the editing page.
The destination host end IPv4 or IPv6 address.
The destination subnet IPv4 or IPv6 address. The field is displayed
when the Subnet value is selected from the Set as drop-down list.
Ports
A port of the destination IP address. You can specify one port,
several ports separated by a comma, or a range of ports separated by
a colon.
Move the switch to the right to specify a port of the source IP
address manually. Upon that the Source port field is displayed.
A port of the source IP address. You can specify one port, several
ports separated by a comma, or a range of ports separated by a colon.
Page 152 of 180
Description