Lan; Ipv4 - D-Link DIR-806A User Manual

DIR-806A Wireless AC750 Dual Band Router
User Manual

LAN

To configure the router's local interface, go to the Connections Setup / LAN page.

IPv4

Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 76. Configuring the local interface. The IPv4 tab. The IP section.
Parameter
IP address
Subnet mask
Device domain name
Figure 77. Configuring the local interface. The IPv4 tab. The DHCP section.
IP
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
The name of the device attached to its IP address in the local subnet.
Page 89 of 180
Description