Lcd Module - ATEN KL1108VN User Manual

LCD Module

No. Component
1 LCD Display
2 LCD Controls
3 LCD On/Off
Button
1
2
3
To access the LCD monitor, slide the LCD module out and flip
up the cover. See Opening the Console, page 29, for details
on sliding the LCD module out.
These buttons control the position and picture settings of the
LCD display. See LCD OSD Configuration, page 35, for
details.
Push this button to turn the LCD monitor on and off. The
button lights when the LCD monitor is off to indicate that only
the monitor is off – not the KVM switch itself.)
Chapter 1. Introduction
Description
14