Standard Rack Mounting - ATEN KL1108VN User Manual

KL1108VN / KL1116VN User Manual

Standard Rack Mounting

A standard rack mounting kit is provided with your KL1108VN / KL1116VN.
The kit enables the switch to be mounted in a rack with a depth of 42–77 cm.
Note: 1. It takes two people to mount the switch: one to hold it in place, the
other to screw it in.
2. The standard rack mounting kit does not include screws or cage nuts.
If you need additional screws or cage nuts, contact your rack dealer.
3. Optional mounting kits – including single person Easy Installation
kits – are available with a separate purchase. See Optional Rack
Mounting, page 275, for details.
17
L Brackets
Side Mountng
Brackets