Front Panel Lcd; Lcd Password - ATEN VM1600A User Manual

Modular Matrix Solution User Manual

Front Panel LCD

The VM1600A features an LCD display for convenient configuration. This
allows you to perform operations such as viewing the IP settings, configuring
the serial port, setting EDID/CEC/OSD/Output Status, selecting security
settings, and loading/saving connection profiles.

LCD Password

If the VM1600A has been configured to require a password for local operation
(see Security Mode, page 63), the password screen appears when the
VM1600A is powered on, and the cursor flashes on the first digit. Enter a 4-
digit password to continue to the Main Screen.
Note: If you are accessing the VM1600A for the first time, the default
password is 1234.
Enter Password: * * * *
Incorrect Password
To enter a password, do the following:
1. Check that the cursor is flashing on the first digit.
2. Use the front panel number pushbuttons (1-9) to enter a 4-digit password.
After the fourth digit, the cursor goes back to the first digit.
3. Press Cancel to clear the password. The digits revert to 4 asterisks (*) and
the cursor returns to the first digit.
Note: 1. The VM1600A password can be any four digit combination
between 1111 to 9999.
2. If you enter an incorrect password, the cursor goes back to the
first digit and reverts to flashing. The Incorrect Password message
displays at the bottom of the screen, but clears as soon as a new
digit is entered.
3. If Password (see Security Mode, page 63) is Enabled, the LCD
display time-out is 5 minutes by default.
44