Technical Specifications - Bajaj Auto Pulsar 150 Owner's Manual

Technical Specifications

Pulsar 150
Engine : 4 stroke, Natural air cooled
Bore x Stroke : 56 mm x 60.7 mm
Engine Displacement : 149.5 cc
Compression Ratio : 9.5 +/- 0.5 : 1
Idling RPM : 1400 +/- 100
Max. Net Power : 10.3 Kw (14 Ps) at 8000 RPM
Max. Net Torque : 13.4 Nm at 6000 RPM
Ignition System : DC CDI
Spark Plug : Champion RG4HC, 2 Nos.
Spark Plug Gap : 0.7 to 0.8 mm
Transmission : 5 speed constant mesh.
Front Brake : Disc Brake
Rear Brake : Drum Brake
Fuel Tank Capacity
Full : 15 litres
Reserve : 3.2 litres
Usable Reserve : 2.0 litres
Dimensions :
Length : 2055 mm
Width : 755 mm
Height : 1060 mm
Wheel base : 1320 mm
Ground clearance : 165 mm
Note : • All dimensions are under UNLADEN condition.
• Above information is subject to change without any notice.
Pulsar 150 Twin Disc
4 stroke, Natural air cooled.
56 mm x 60.7 mm
149.5 cc
9.5 +/- 0.5 : 1
1400 +/- 100
10.3 Kw (14 Ps) at 8000 RPM
13.4 Nm at 6000 RPM
DC CDI
Champion RG4HC, 2 Nos.
0.7 to 0.8 mm
5 speed constant mesh.
Disc Brake
Disc Brake
15 litres
3.2 litres
2.0 litres
2035 mm
765 mm
1115 mm
1345 mm
165 mm
1
• This vehicle complies to BS IV standards.
• AHO is government regulation.
Pulsar 180
4 stroke, Natural air cooled.
63.50 mm x 56.40 mm
178.60 cc
9.5 +/- 0.5 : 1
1400 +/- 100
17.02 Ps at 8500 RPM
14.22 Nm at 6500 RPM
DC CDI
Champion RG4HC, 2 Nos.
0.7 to 0.8 mm
5 speed constant mesh.
Disc Brake
Disc Brake
15 litres
3.2 litres
2.0 litres
2035 mm
765 mm
1115 mm
1345 mm
165 mm